News

Apple iPhone 14 Pro Max mobile phone’s latest CAD image spotted

The latest CAD image of Apple’s iPhone 14 Pro Max has now been exposed on the Internet, which leaked the exact size of the phone. This CAD image once again shows that the iPhone 14 Pro Max uses an exclamation point punch-hole screen, replacing the current notch groove design.

Moreover, the device has other minor changes compared to the iPhone 13: slightly moved buttons, a SIM card tray, and a 5G antenna. In addition to detailed CAD drawings.

Join tip3x on Telegram

The revealer ShrimpApplePro also released a series of measurements of the device, showing the exact dimensions of various elements of the iPhone 14 Pro: width 78.53mm (including side buttons) x length 160.71mm x maximum thickness of 12.16mm.

The diameter of the display pills (two) is 7.15mm, while the diameter of the front camera hole is 5.59mm. The distance from the opening to the top of the screen is 2.29mm. iPhone 14 Pro Max earpiece height is 0.57mm, and iPhone 13 Pro Max is 1.52mm.

Furthermore, the most obvious change should be that the frame of the phone has been narrowed by nearly 20%, the width of the frame of the iPhone 14 Pro Max is 1.95mm, and the width of the iPhone 13 Pro Max is 2.42mm.

Besides, iPhone 14 Pro Max’s rear camera bump height is 4.18mm from black glass to top, the rear camera with the metal ring is 13.85mm in diameter, without the metal ring camera is 8.05mm in diameter, rear flash is 6.9mm in diameter, LiDAR sensor is 6.5mm in diameter (probably the bar has been removed due to a calculation error).

(via)

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

The Latest

To Top